About

About NerdRoots

NerdRoots makes 3D-printed cooler adapters and fan shrouds for Bitaxe and NerdQaxe home miners. We’re in California, run by a home miner who also builds HashGrid.

Made by someone who mines

We run Bitaxe Gamma 601, Bitaxe Gamma 602 and NerdQaxe+/++ miners ourselves: the same boards these parts are made for.

What we make

8 parts for 4 coolers. Each one mounts a cooler or fan you already know onto your miner:

• 52Pi ICE Tower (tower cooler) on the Bitaxe Gamma 601/602: Bitaxe 52Pi ICE Tower Heatsink Adapter · install guide
• GeeekPi Low-Profile Plus (low-profile cooler) on the Bitaxe Gamma 601/602: GeeekPi Low-Profile Plus Socket Adapter, GeeekPi Radiator Fan Adapter (Noctua A6), GeeekPi Socket + Fan Combo · install guide
• Argon THRML 60mm (radiator cooler) on the Bitaxe Gamma 601/602: Argon THRML Radiator Adapter, Argon THRML 60mm Fan Adapter, Argon THRML Radiator + Fan Combo · install guide
• Thermalright AXP90 (low-profile cooler) on the NerdQaxe+/++: NQ-HELIX 120mm Fan Shroud · install guide

The NQ-HELIX is a third-party design, sold here under license. Coolers, fans and miners are sold separately; the compatibility chart shows which fits which.

How they’re made

• 100% infill PETG. Solid all the way through. PETG handles miner heat where PLA softens.
• Hardware in the box. Heat-set brass inserts come installed, with stainless screws and plastic washers, where the kit calls for them.
• Made & shipped from California. Ships in 1–2 business days. US shipping is $5.49 for the first item plus $1.00 for each additional item.
• 30-day returns. See returns & exchanges.

Where to buy

Check out here by card or PayPal, or buy the same parts on Amazon, where NerdRoots has 100% positive seller feedback. On Etsy, NerdRoots is a Star Seller with a 5.0★ rating.

HashGrid

We also build HashGrid, an iPhone app that monitors your Bitaxe and NerdQaxe hashrate and temperatures.

Get in touch

Email support@nerd-roots.com or use the contact form. We’ll reply, usually within one business day.